ESB48 MAGMAWELD E7018 Low Hydrogen Electrodes
ESB48 MAGMAWELD E7018 Low Hydrogen Electrodes are Suitable for welding fabrication of dynamically loaded steel constructions, bridge, shipbuilding, pipe-line, pressure vessels, tanks, boiler and machines where high toughness is required. Weld metal recovery is approx. 115 %. Smooth and clean welds merging into base metal without undercuts. Good gap bridging properties. Welds are of X-ray quality.
It is suited for depositing buffer layers on higher carbon steels.
- All Position
- Stable Arc
- Minimal Spatter
- Easy to Control Weld Deposition
- Easy Slag Removal
- Good Weld Bead Appearance
- International Approvals
Classification:
AWS/ASME SFA – 5.1 E 7018 – H8 | EN ISO 2560 – A E 38 2 B 12 H10 | TS EN ISO 2560 – A E 42 3 B 42 H10
DIN 1913 E 51 54 B 10 • TS 563 E 51 54 B 10 (H)
Typical Mechanical Properties of Weld metal:
Yield Stress Tensile Strength Elongation Impact Values
500N/mm² 570N/mm² 26% 90J@-30°C – 80J@-60°C
Typical Weld metal Analysis:
C: 0.07% Si: 0.40% Mn: 1.00%